Side view of a thin black metal charging stand next to Upright, a solid walnut top on a triangular cast concrete base Win a free iPhone or $1,000 cash

Rated 4.9/5 on the original Upright 1,400+ pre-orders

Wireless charging,built different.

A 25W wireless charging stand with a cast concrete base. Lift your phone with one hand and the stand stays put.

Pre-order $78.40 $98. $68.60 each for 2+.

Get my Upright

20% off one, 30% off two — our best price. Batch 2 ships February 2027. See where we are now

  • 25W Qi2.2Fast magnetic charging
  • Heavy, weighted baseDock and lift with one hand
  • iPhone + AndroidQi2 phones, or any MagSafe case
  • 2-year warrantyMaterials and workmanship

As seen in

“Concrete and hardwood have no business being inside a wireless charger.”
“Engineered for effortless, one-handed docking, the space is commanded rather than cluttered by Upright.”
“The folks over at Modhaus… went with a more extreme solution: The base of their Upright charger is cast concrete.”

What the weight and the speed do

  1. Upright in black and charcoal holding a phone on a wooden table

    Heavy on purpose.

    A stand you dock with one hand shouldn’t slide when you lift your phone off. So we cast the base in concrete. Set your phone down, pick it back up, and the stand stays where it is.

  2. A phone charging on Upright on a wooden table

    Fast when you need it.

    Up to 25W*, about 3x faster than an older 7.5W wireless stand. That’s about 0–50% in ~30 minutes.

*Compared with 7.5W wireless charging stands. 25W needs a Qi2 25W-compatible phone and a 36W or higher USB-C PD adapter; other Qi2 phones charge at up to 15W. Charge times vary by device, battery health, and temperature.

Close-up of the edge of Upright in black oak and stone concrete

How Upright compares

20% off pre-order Upright Premium Charging Trays Mass-Market Chargers
Price $98$78.40 on pre-order $130–180 $30–60
Crafted with premium natural materials Yes Yes No
Designed to fit in your space Yes Yes No
Heavy base for one-handed docking Yes No No
Built for StandBy, clock and photos in view Yes No Varies
Magnets hold your phone in place Yes Varies Yes

Pre-order · Batch 2 of the 2nd generation

Give your phone a better place to charge.2,000+ already claimed. Batch 2 is going fast.

Get yours from Batch 2 at up to 30% off, until this price ends on November 30.

Limited-time pricing, our thanks for waiting. Upright is once this price ends.

Choose your finish

Finish:

Choose your pre-order

Limited time: our best price, ends Nov 30

Only 389 left at pre-order pricing

  • From the second production run, estimated to ship February 2027
  • Follow the build, updates directly from the founder
  • Fast wireless charging, up to 25W
  • 2 m braided USB-C cable included
  • 2-year warranty

With your pre-order

2entries2 entries to win a free iPhone 18 Pro, iPhone Duo or $1,000 cashEntries close Dec 2. Winner chosen Dec 14. How the giveaway works
Best value
How many stands? 2
  • Best value, save compared with buying two at launch
  • From the second production run, estimated to ship February 2027
  • Follow the build, updates directly from the founder
  • Pre-order price for early supporters, you won’t find this price after launch or anywhere else
  • Fast wireless charging, up to 25W
  • 2 m braided USB-C cable included
  • 2-year warranty

With your pre-order

4entries4 entries to win a free iPhone 18 Pro, iPhone Duo or $1,000 cashEntries close Dec 2. Winner chosen Dec 14. How the giveaway works

Orders ship in the order they’re placed.

Need a charging adapter?

Do I need an adapter?

Upright needs a USB-C power adapter rated 36W or higher to charge at its full 25W.

We don’t include one in the box because most people already have one. If you don’t, our 45W adapter covers it.

Don’t need the full 25W? A lower-power adapter works fine, it just charges a little slower. Check our specs for more details.

Total
Early supporter savings
Entries to win an iPhone or $1K cash

Shipping and tax calculated at checkout.

Does Upright work with iPhone Duo?

We tested a Duo on our pre-production Upright sample, with the Duo in a case, and had no problems.

We still need to test it without a case. We’re waiting on our latest production samples to do that, so the stand we test is as close as possible to the one that arrives in your package.

Tipping: no concern.Upright’s base is twice as heavy as the phone. It supports the Duo fully open, without tipping, with no problem.

Slipping.The phone we tested had a case on, and there were no issues with slipping… at all, as you can see in the videos below.

What this test is missing is one without the case. Once our latest production samples arrive we’ll run a full, thorough test, without a case as well. Based on what we’ve seen so far, we feel good about it, but we don’t want to over-claim.

We’ll post full results when available.

Batch 1 sold out. Batch 2 is going fast.

Batch 1 · Ships Jan 2027Sold out
Batch 2 · Ships Feb 202761% claimed
Batch 2 · Estimated to ship February 2027
  1. Funded
  2. Tooling
  3. Certification
  4. Production
  5. Ships Feb 2027
Updates come straight from our founder at every step.See the journey

The journey so far

From one stand in a garage to the first production run.

Upright started in a garage in Austin as a bring-your-own-MagSafe stand, and people loved it. So we took it a step further, with Qi2.2 charging built right in. It’s taken more than a year of full-time work to get from there to a factory line. Here’s how, and where yours is right now.

Swipe the timeline and tap any momentDrag the timeline and click any moment to open it

  1. The founder in a respirator in the garage beside racks of cast concrete stand bases

    We wanted a charger that looked right on a desk and couldn’t find one. So we made one: a cast concrete base, a walnut top, and a slot for the MagSafe puck we already had.

  2. Assembling original Upright stands at a table in the living room, a TV and a Christmas tree in the background

    People liked it, and orders came in faster than we could make them. Every free hour went into it, late into the night, so assembly moved into the living room. We invested in tools and tightened up production, and still couldn’t keep up. At the same time, people kept asking for charging built in. That was the signal to go all in: a manufacturing partner, real product development and sourcing.

  3. Work on the new Upright started at the end of December. By March we couldn’t do both anymore and had to choose, so we stopped selling the original. Until then we’d done everything ourselves. This was the first time we brought in help: sourcing partners who connected us with top-of-the-line manufacturers able to meet our standard for quality.

  4. For a simple design, there’s a lot to get right. Sample after sample, with small changes to the corners, the angle and the charging, and every one tested on a wireless charging tester before the next round.

  5. We built a following for the new Upright and spent about a month filming and photographing it, using the first samples from our factory.

  6. The Upright Kickstarter campaign page showing $105,305 pledged

    We launched on Kickstarter and hit our goal in under two hours. By the end, 819 backers had pledged $105,305.

  7. Technical drawing of the Upright hardwood top with its dimensions

    Work with our factory began with design for manufacturing: refining the design before committing to permanent tooling. A mounting bracket with fasteners instead of glue, tighter tolerances for concrete as it cures, and a redesigned circuit board that reduces the heat reaching your phone. Once that was complete, we moved on to custom molds and tooling.

  8. Qi2.2 certification and the regulatory compliance testing every charger needs are complete.

  9. Production has started on the first batch, which sold out. Batch 2 follows right behind it, then ships to us in Austin.

  10. Batch 2 arrives in February 2027, with updates from the founder at every step until then.

    Join the first run
01 / 10

Rated 4.9/5 on the original Upright

This is the second Upright. Here’s what people said about the first.

The first Upright made it into thousands of homes. Every video and review here is for that original version. The new one keeps everything they loved in a sleeker design: an improved viewing angle, tighter corner radii and a color-matched charging puck, with 25W charging built right in.

  • Looks great on my desk!

    “Even when ‘empty’, it enhances the appearance of my desk, like a piece of sculpture. With the phone in place, its heft makes this a more-usable charger…”

    Mark W. · Original Upright

  • It’s awesome.

    “The construction is amazing and it adds a nice touch to my desk. Doesn’t move due to the heft…”

    Kevin L. · Original Upright

  • Great Quality, Excellent Utility

    “Was tired of keeping a charging cable near the bed and upgraded for both nightstands - stays put, has great weight and build quality…”

    Trevin W. · Original Upright

  • This is The One!

    “I have been hunting for a bedside iPhone charger for months, and not happy with what was out there… Finally, something beautiful. Finally, a unit that has some weight… The wood/black works so beautifully and elegantly with my walnut bedroom furniture.”

    Jack B. · Original Upright

  • Great Phone Stand

    “I’ve already bought two, one for home & one for the office and have a lot of compliments on it at work.”

    Tim S. · Original Upright

  • Great quality!

    “Love my new phone stand. Very high quality and adds class to my nightstand.”

    Maureen · Original Upright

  • Genuinely Beautiful!

    “Matches my desk and work space perfectly! Overall great quality with a very simple design to keep my desk space clean.”

    Shay S. · Original Upright

  • Love this Stand!

    “Looks very cool! I usually like a more “tech” look, but this looks great on my nightstand.”

    Donald M. · Original Upright

Good to know

Your questions, answered

Anything else? Email hello@shopmodhaus.com and a real person will get back to you.

When will my Upright ship?

The first batch sold out and ships in January 2027. Upright from Batch 2 is estimated to ship in February 2027. Certification is complete and production is underway.

Hardware timelines can shift, so delays are possible. If anything changes, you'll hear it from us first. We've shared in-depth updates at every stage since initial design, sent directly from our founder, and we'll keep them coming by email through production and shipping.

How heavy is it?

Over a pound, in a stand about 5 inches tall. That weight is what lets you lift your phone off with one hand while the stand stays where it is.

When am I charged?

Your card is charged in full at checkout, the same as any order. The 20% pre-order discount is applied automatically, and it's locked in for your order.

Can I cancel my pre-order?

If you need to cancel, please let us know within 14 days of ordering for a full refund. Pre-order payments go straight into producing your batch, so they aren't eligible for change-of-mind returns or cancellations after that window. To cancel, email hello@shopmodhaus.com.

Read the full pre-order policy

What happens if the ship date changes?

February 2027 is our current estimate for Batch 2, not a guarantee. If anything changes, we'll email you right away.

Either way, you'll hear from us at every step, with behind-the-scenes looks as Upright makes its way to you.

Does it work with my phone and case?
  • iPhone 12 and newer and Pixel 10 and 11 (not the A models) have magnets built in and attach directly.
  • iPhone Duo: we tested it in a case on our pre-production sample and had no problems. We're retesting without a case on our latest production samples and will post full results when available.
  • Samsung Galaxy, older Pixels, and other Android phones with Qi wireless charging work with a MagSafe-compatible case.
  • Using a case on any phone? It needs to be MagSafe-compatible and 3 mm or thinner.

Phones that support Qi2 25W charge at up to 25W. Other Qi2 phones charge at up to 15W. Upright also charges AirPods with a MagSafe charging case.

Do I need a power adapter?

Yes. Upright needs a USB-C PD adapter rated 36W or higher to reach its full 25W speed. It isn't in the box, because most people already have one.

If you don't, you can add our 45W USB-C adapter to your pre-order at 20% off (US / Canada plug).

What's in the box?

Your Upright and a 2m (6.1 ft) nylon braided USB-C to USB-C cable. The power adapter is sold separately.

What's the warranty and return policy?

Every Upright includes a 2-year manufacturer's warranty on materials and workmanship, from the day it arrives.

Because pre-orders are made to order, they aren't eligible for change-of-mind returns once they arrive. If your Upright arrives faulty, or you run into an issue with materials or workmanship, we'll cover it under the warranty with a replacement.

How is the new Upright different from the original?

The original Upright was a stand for your own MagSafe charger. The new Upright builds 25W Qi2.2 charging right in, works with iPhone and Android, and refines the design with tighter corners and a better viewing angle. Same cast concrete base and solid hardwood top.

While you wait

The stand that stays put.

  • 2-year manufacturer’s warranty
  • Updates at every step until it ships
Pre-order now · $98 $78.40

20% off one, 30% off two — our best price. Ends November 30. Batch 2 ships February 2027.

Four Upright stands in oak, walnut and black-stained oak on stone and charcoal bases, lined up in a beam of light